Why Create a Wish List?
- Save products for future purchase
- Organize by vehicle or job type
- Share Wish Lists with your friends
The Whiteline Anti Dive Kit provides 2 point caster adjustment changing the nature of front anti-dive and lift. Revised anti-dive geometry minimises deflection under braking whilst the low compliance synthetic elastomer bushings minimise dynamic caster loss and provide positive steering feedback. The result is superior traction under power and braking, improved turn-in and more consistent alignment angles during cornering.
To better understand the dimensions of this bushing you can use the diagram below and the data from the Highlight section

Control Arm Bushings by Whiteline. Worn control arm bushings have a huge influence on vehicle stability and braking efficiency. Replace these worn bushings with Whiteline control arm bushings for chassis control.
Features:
|
California Residents: Prop 65 WARNING |
| Year range | Make | Model | Sub Model | Notes |
| 2005-2010 | Ford | Mustang | Base | Adds +1.0deg caster + anti-dive |
| 2005-2010 | Ford | Mustang | GT | Adds +1.0deg caster + anti-dive |
| 2007-2008 | Ford | Mustang | Shelby GT | Adds +1.0deg caster + anti-dive |
| 2007-2010 | Ford | Mustang | Shelby GT500 | Adds +1.0deg caster + anti-dive |
| 2008-2009 | Ford | Mustang | Bullitt | Adds +1.0deg caster + anti-dive |
| 2008-2009 | Ford | Mustang | Shelby GT500KR | Adds +1.0deg caster + anti-dive |
| Bushing Type: | Type 1 |
| OD A in mm: | 39.3 |
| ID B in mm: | 28 |
| Length C in mm: | 28 |
| Flange Thickness in mm: | 7 |
| Flange OD in mm: | 49 |
| C/Tube in mm: | 28x14.4x6 |
| Note-1: | Other bushes also contained in this kit |
| Warranty: | 3 Years |