Highlights: 6061 Aluminum; (2) Mishimoto M16x1.5 to 3/8" Push-on Hose Barb Fittings|Mishimoto Lifetime Warranty; No; M16 X 1.5 Male; 3/8" Hose Barb; 1.86"; .78"; 2

Highlights: Polished; 16 in (406 mm); Aluminum; 4 in (102 mm)

Highlights: Silver; 6061 Aluminum; (1) Oil Cooler|(1) Mishimoto Lifetime Warranty; No; Bar-and-Plate; 5.51"; 13.98" x 5.51"; 1.57"; 0.65 qt; -10AN; -10AN; 6.30"; 17.01"; 1.57"

Highlights: Black; 6061 Aluminum; (1) 3/8"\xc2\x9d Hose Barb x 3/8"\xc2\x9d Hose Barb Black Nylon Ball Valve|(1) 6" Rubber Hose, 3/8"\xc2\x9d I.D.|(1) 3/8"\xc2\x9d NPT x 3/8"\xc2\x9d Tube I.D. Plastic Barbed Fitting|(3) 12-20mm Worm-gear Clamps|Mishimoto Lifetime Warranty; No; 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; 2

Highlights: Black; 6061 Aluminum; (1) Remote Oil Filter Housing|(1) Mounting Bracket|(1) Center Adapter|(1) Center Adapter Locking Ring|(2) M22 X 1.5 Dowty Seal Plugs|(4) M8 X 1.25 (20mm) Button Head Bolts|Mishimoto Lifetime Warranty; No; M20 X 1.5 Filter Thread; It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact sales@mishimoto.com.; M22 X 1.5

Highlights: Silver; 6061 Aluminum; (1) Aluminum Tank|(2) Black fittings 10mm I.D.|(1) Black bracket|(2) Allen bolts|(2) Allen bolt washers|(1) Black magnetic drain plug|(1) Dowty seal|(2) Small clamps|(2) Bolts|(2) Nuts|(1) 80cm reinforced hose; No; 0.95 lbs; FALSE; 480 cc; M14 x 1.25; M12 x 1.0; M12 x 1.0; 2.5"; 7"; 3

Highlights: Polished; 18.5 in (470 mm); Aluminum; 4 in (102 mm)

Highlights: (1) -10AN Banjo Fitting|(1) M20 x 1.5" Banjo Bolt|(2) Dowty Seals|Mishimoto Lifetime Warranty; No; 15-25 ft/lbs (operating range) for all straight fittings and banjo bolts. Do not exceed the maximum torque rating of 35 ft/lbs.

Highlights: 6061 Aluminum; (1) 10-Row Oil Cooler (Silver or Black)|(1) 4ft Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting|(1) 5ft stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting|(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)|(2) -10AN Fittings|(2) Dowty Oil Seals|(1) Large O-Ring|(2) 1/8" NPT Allen Key Plugs|(2) Sandwich plate adapters|Mishimoto Lifetime Warranty; No; Silver; It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact support@mishimoto.com.; Stacked-plate; 2.76"; 11"; 12.91" x 2.81"; 1.97"; -10AN; Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.; 10; -10AN

Highlights: Silver; 6061 Aluminum; (1) Oil Cooler|(1) Mishimoto Lifetime Warranty; No; Bar-and-Plate; 5.51"; 18.50" x 5.51"; 1.57"; 0.80 qt; -10AN; -10AN; 6.30"; 21.54"; 1.57"

Highlights: Black; 6061 Aluminum; (1) Oil Cooler|(1) Mishimoto Lifetime Warranty; No; Bar-and-Plate; 5.51"; 13.98" x 5.51"; 1.57"; 0.65 qt; -10AN; -10AN; 6.30"; 17.01"; 1.57"

Highlights: Silver; 6061 Aluminum; (1) Aluminum Tank|(2) Black fittings 10mm I.D.|(1) Black bracket|(2) Allen bolts|(2) Allen bolt washers|(1) Black magnetic drain plug|(1) Dowty seal|(2) Small clamps|(2) Bolts|(2) Nuts|(1) 80cm reinforced hose; No; FALSE; 900 cc; M14 x 1.25; M12 x 1.0; M12 x 1.0; 3.5"; 7"; 2

Highlights: Silver; 6061 Aluminum; (1) Mishimoto Oil Cooler|Mishimoto Lifetime Warranty; No; Stacked-plate; 5.43"; 11"; 11.0" x 5.43"; 1.97"; -10AN; -10AN; 12.95"; 6.44"; 1.97"; 19

Highlights: Black; 6061 Aluminum; (1) Oil Cooler|(1) Mishimoto Lifetime Warranty; No; Bar-and-Plate; 5.51"; 9.45" x 5.51"; 1.57"; 0.50 qt; -10AN; -10AN; 6.30"; 12.48"; 1.57"

Highlights: Stainless Steel; Worm Gear; 4; 2; Polished; Aluminum

Highlights: Silver; 6061 Aluminum; (1) Mishimoto Oil Cooler|Mishimoto Lifetime Warranty; No; Stacked-plate; 2.76"; 11"; 11.0" x 2.76"; 1.97"; -10AN; -10AN; 12.95"; 3.8"; 1.97"; 10

Highlights: Black; 6061 Aluminum; (1) Compact 3-Port Baffled Oil Catch Can|(3) Aluminum 1/2" Barbed Fittings|(1) Universal Mounting Bracket|Mishimoto Lifetime Warranty; No; TRUE; 3 fl oz.; 3/8" NPT; M16 x 1.5; 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).; M16 x 1.5; 2.5"; 3.8"; 2

Highlights: 6061 Aluminum; (1) 19-Row Oil Cooler|(1) 4ft Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting|(1) 5ft Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting|(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)|(2) -10AN Fittings|(2) Dowty Oil Seals|(1) Large O-Ring|(2) 1/8" NPT Allen Key Plugs|(2) Sandwich plate adapters|Mishimoto Lifetime Warranty; No; Silver; It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact support@mishimoto.com .; Stacked-plate; 5.43"; 11"; 11.25" x 5.5" x 2"; 1.97"; -10AN; Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.; 13"; 5.5"; 2"; 19; -10AN